Характеристики
Product description:2.8 inch color screen, support 16BIT RGB 65K color display, display rich colors320X240 resolution, optional touch functionUsing SPI serial bus, only a few IO can light up the displayWith SD card slot for easy expansion experiment Product parameters:Display color: RGB 65K colorWith touch: MSP2807Size: 2.8 (inch)Type: TFTDriver chip: ILI9341Resolution: 320*240 (Pixel)Module interface: 4-wire SPI interfaceEffective display area (AA area): 43.2x57.6 (mm)Module PCB bottom plate size: 50.0x86.0 (mm)Working temperature: -20 ℃ ~ 60 ℃Storage temperature: -30 ℃ ~ 70 ℃VCC power supply voltage: 3.3V ~ 5VLogic IO port voltage: 3.3V (TTL)Power consumption: about 90mA Interface definition:VCC: 5V / 3.3V power inputGND: groundCS: LCD screen chip select signal, low level enableRESET: LCD screen reset signal, low level resetDC / RS: LCD screen register / data selection signal, low level: register, high level: dataSDI (MOSI): SPI bus write data signalSCK: SPI bus clock signalLED: Backlight control, high-level lighting, if no control is required, then connect to 3.3VSDO (MISO): SPI bus read data signal, if you do not need the read function, you can not connect(The following is the wiring of the touch screen signal line, if there is no need to touch or the module itself does not have a touch function, it may not be connected)T_CLK: touch SPI bus clock signalT_CS: touch screen chip select signal, low level enableT_DIN: touch SPI bus inputT_DO: touch SPI bus outputT_IRQ: touch screen interrupt signal, low level when touch is detected
Отзывы о 2.8 Inch 2.8" TFT Color Touch Screen LCD Display Module Drive ILI9341 Interface SPI 3.3V/5V Resolution 240*320 For Arduino |
Отзывы о товарах