Dog Training Collar 2 in 1 PTS1200 Remote With Anti Bark Controller Device for Dogs |

Характеристики

Trainertec PTS-1200 Remote Dog Training Collar with Auto Anti Barking

Thank you for choosing PTS1200 Remote dog training collar. Our mission is to offer the best electronic training solutions. We want to ensure your dog’s safety by providing you with the tools and techniques to successfully train your pet. Main Features * - Range in open field up to 1200 meters. * -Anti bark function * -Train up to 3 dogs from the same transmitter. * -Highlight LED functionallows you to find pet from 200~300 meters away at night * - 10 levels each of static shock. * - 10 levels of vibration * - “Beep” sound activated with a separate button. * - Two buttons “+” and “-” allow you to set your intensity * - LCD digital display for 10 shock & vibration levels & dog ID * - Memorize shock level in transmitter for different dogs. * - Easy to operate with rubber button. * - Waterproof transmitter and receiver. Dogs can swim freely. * - Rechargeable 3.7V Li-ion battery for transmitter and receiver. * -Strong TPU Collar Strap. * - LED low power indication, red light will flash when battery level is low. * - Full functional multi-dog training system. * - Around 8 seconds safe static shock protection.

Setting Up Multi-Dog System

If you have 3 dogs need to training, How to connect 3 receiver collars with 1 remote transmitter? How to use 1 Remote Transmitter to 1,2, 3 Receiver Collars : Connected a Receiver Collar NOTE:Turn On the transmitter - Press on/off button for 4 seconds Turn On the Receiver what you want to connect - Press on/off button for 4 seconds Step 1: a. Press and hold the " 1 " and " Beep "at the same time until the digital numbers on the LCD display starts counting up,The same time you will hearing 5 "beeeps" and High light led flashing slow. 1=A=White 2=B=Red 3=C=Green b. Release the button, then connected finished. You can use the remote training collar Disconnect a Receiver Collar NOTE:Turn On the transmitter - Press on/off button for 4 seconds Turn On the Receiver what you want to connect - Press on/off button for 4 seconds Step 1: a. Press and hold on the "Beep " and " Vibrate " button at the same time until hearing 5 "beeps", b. Release the button, then disconnect

Anti Bark Operation

Your remote trainer has anti bark function. Please follow the below steps to turn on the Anti bark mode. Step 1: Choose proper shock level for anti bark a. Press the "+ " or "-" buttons to select suitable shock level. b. Then press "Vibrate" button and confirm the receive collar receive the signal from Transmitter and emit at least one shock . The receive collar will keep this shock level for anti bark when you turn on the anti bark mode at once. c. If you want to change the anti bark shock level . Please repeat above 1) and 2) to set new shock level. d. If you don’t set anti bark level , when you turn on the anti bark mode ,the shock level will be same as the final emitting static shock of the receive collar. The vibration is no relationship with anti bark shock level. Step 2: Turn the anti bark mode on a. Hold and press on the On/Off button of receive collar for more than 2 seconds. When the Red light is on then release it at once. b. The green Led light of receiver will flash 2 times of 5 seconds . The anti bark mode is on ,the remote control function is off.The Transmitter can not control the receiver under anti bark mode Step 3: Turn the anti bark mode off a. Hold and press on the On/Off button of receive collar again for more than 2 seconds. When the red light is on then release it at once. b. The green Led light of receiver will flash 1 times of 5 seconds . The anti bark mode is off ,the remote control function is on .